Products    About us     Sales     Contact     Comments    Chinese

 

           

 

 

PCM30

PDH

Interface Converters

Power
Distribution

SCADA_RTU

 

 

 

 

 

   

Products introduce

 

Fiber Optic Multiplexer+PCM

SDH

Distribution
Frame

Transmission Power

Antenna

 

       
 Power Distribution and wiring channel to standard the communication system. Our power distribution and wiring channel are widely used in Beijing military. 
  
 Wiring channel is installed on the top of the rack, and all of the cables are contained in the channels, which makes it look regularly.
  
 Power distribution is fixed near by the communication rack. Determined by the depth of the rack, the power distribution has various modules, such as 300mm, 600mm, 900mm.
  
The input of the power distribution is 1 channel, 2 channel, and 3 channel, the output is accordance with the number of the rack or the load, which can be 8 channel, 16 channel, 24 channel or 32 channel. The price is also determined by the configuration.
  
 The alarming output and the voltage monitor are completed by the power monitoring unit on the top of the equipment. The unit can detective the position of the air output and input, then set the ceiling and the limit of the voltage alarming.
  
 The power monitoring unit will indicate the alarming when the circuit breaker is disconnect.
  Because there are some discrepancies between the transmission room and the rack, so this module product needs customization, especially the wire channel should accordance with the blueprint or to make a survey of the transmission room. 
  
  The configuration of the alternate current distribution rack is basically the same. The price is due to whether need the output alarming.

  
  AC and DC mixed power distribution is fit for installing in the small-scale transmission room, the principle and the configuration are basically the same.