Products    About us     Sales     Contact     Comments    Chinese

　

 　 　 　 　 　 　

　

 　 PCM30 PDH Interface Converters Power
Distribution		 SCADA_RTU

FOM480

 　 　 　 　 　 　

instructions

 　 Fiber Optic Multiplexer+PCM SDH Distribution
Frame		 Transmission Power Antenna
　 　

　

 




Front panel

























 Back panel

       

  FOM4800 supports both alternative current (AC) and direct current (DC) feeding. And it is available for AC and DC inputs feeding simultaneously.
The Ethernet indicators are on the front panel, and the LED indicators are also on the front panel for a direct check of alarm.

  The LCD on the front panel shows the operation and alarming status of both local and remote equipment. And with the help of the buttons besides it, common loop modes can be set for tests. The LED indicators are also placed on the front panel for a direct check of alarms.






  All of the unit cards are removable and support hot-swap and the configurations are available through the assemblage of the common modules.
  The V.35 interface through a 34-pin V.35 connector or the DB25 interface The optical interface works under 1+1 mode or 1+0 mode, one interface with single fiber+1 interface with double fibers.

　

 　
　 　 　 　 　 　 　 　 　 　 　 　 　
　


















Service 
assemblage

























　
 
  • The common service unit cards are 4×E1 card, 4×V.35 card, 100M-LAN card and 8.448M line rate LAN card and network management interface card.
  • All the modules are removable and support hot-swap. The following configurations are available through the assemblage of the common modules:

  •     16×E1

  •     12×E1+4×V.35

  •      8×E1+8×V.35

  •      4×E1+12×V.35

  •      16×V.35

  •      4×10/100Base_T

  •         12×E1+1×10/100Base_T

  •         8×E1+2×10/100Base_T

  •         4×E1_3×10/100Base_T

  •         12×V.35+1×10/100Base_T

  •        8×V.35+2×10/100Base_T

  •         4×V.35+3×10/100Base_T         

  •         4×E1+8×V.35+1×10/100Base_T

  •          4×E1+4×V.35+2×10/100Base_T

  •          16×E1+1×10/100Base_T

  •          12×E1+4×V.35+1×10/100Base_T

  •          8×E1+8×V.35+1×10/100Base_T

  •          4×E1+12×V.35+1×10/100Base_T

  •          16×V.35+1×10/100Base_T

  •          4×10/100Base_T +1×100Base_T

  •          16×E1+1×10/100Base_T+1×100Base_T

  •          8×E1+2×10/100Base_T+1×100Base_T

  •          4×E1_3×10/100Base_T+1×100Base_T

  •          12×V.35+1×10/100Base_T+1×100Base_T

  •          8×V.35+2×10/100Base_T+1×100Base_T

  •          4×V.35+3×10/100Base_T+1×100Base_T

  •          8×E1+4×V.35+1×10/100Base_T+1×100Base_T

  •          4×E1+8×V.35+1×10/100Base_T+1×100Base_T

  •          4×E1+4×V.35+2×10/100Base_T+1×100Base_T

   More assemblage will be provided when adopting V.11, V24 or video card.

 　
　 　 　 　 　 　 　 　 　 　 　 　 　
　 　 　
   
          FOM480 technique parameters

     If you need use's manual, please telephone us.